Water shedding pole with 10 sand bags

Does your cover still blow up due to strong gusts of wind? Then sandbags are the solution. With these bags, you can easily add extra weight to the cover and prevent it from blowing up. The sandbags can be attached to the underside of the cover. Do not hang the bags on the cover, but attach them so they touch the ground and rest on it. This prevents the covers, due to the weight constantly hanging on the cover, from tearing over time. The sandbags are supplied without contents and should be filled with sand or pebbles.

A water shedding pole (aka: RWSP) can be used to slightly lift the surface of your cover. This allows rainwater to run off the cover easily. This prevents puddles of water staying on the cover and also promotes air circulation on the inside of your cover. The pole is quite easy to assemble. With the three rods, you can determine the height of the Water Shedding Pole and easily slide it together. Then it comes with a wide bottom and a small round top, attach these to the top and bottom, and it is ready to use. 

You can make the RWSP smaller by removing a tube in between. Standard dimensions are then 70, 50, 30 and 10 cm.
If the Water Shedding Pole is just too high, it can easily be cut to size and still be used.